The operating procedures of Outdoor Platform Lift for Disabled :
(1)The lifting platform has been strictly debugging, arbitrarily adjust the regulator valve, Non-professionals are not allowed to adjust the regulator valve.
(2)Carefully check the hydraulic, electrical system, no leakage or bare phenomenon before use, do not loose all the joints and fasteners before you can use.
(3)Power on, start the motor, empty lift, check the hydraulic system before use.
(4)The center of the load should be as close as possible to the center of the work surface. The moving doors at both ends of the guard railing should be locked before working.
(5)The lifting platform shall work strictly in accordance with its prescribed carrying capacity, and overloading work may result in damage to personnel and equipment.
(6)The lifting platform is strictly prohibited from moving and shaking during the rise and fall.
(7)Any unusual noises during the work should be stopped immediately to avoid injury to personnel or damage to equipment.
(8)After the work completed, you should lower the platform, cut off the power supply, and close the legs, pushing the platform into the specified position.
