+86 17625975976 apluselevator.cn@gmail.com
APLUS vertical platform lifts are suitable for solving disabled passengers with large height differences between floors. Platform space can accommodate both wheelchairs and escorts.
APLUS vertical platform lifts are customized products for lifting cargo or wheelchair for disabled people.
APLUS Vertical Platform Lifts have the features of smooth running speed, high safety , easy installation. small space required & no pits required.
APLUS vertical platform lifts are customized products for lifting cargo or wheelchair for disabled people.
APLUS vertical platform lifts have the features of smooth running speed, high safety , easy installation. small space required & no pits required.
APLUS vertical platform lifts are suitable for solving disabled passengers with large height differences between floors. Platform space can accommodate both wheelchairs and escorts.
Features of Aplus vertical wheelchair lift:
|
Product name
|
Wheelchair lift/Home elevator
|
|
Platform Size
|
1650mm(L)* 1100mm(W) or Customized |
|
The minimum height of the lifting base plate |
60mm
|
|
Maximum Lifting Height
|
9M(Customized)
|
|
Entry & Exit Mode
|
0°/90°/180°
|
|
Lifting Speed
|
60mm/s—Adjustable
|
|
Load Capacity
|
300KG
|
|
Control Source
|
220V or Customized
|
|
Motor Power
|
1.1KW
|
|
Power Supply
|
220V/50HZ or Customized
|
|
Drive System
|
Hydraulic driven
|
|
Running Mode
|
Jogging control or setted lifting range
|
|
Installation Mode
|
No pit, installed to the concrete ground directly
|
|
Extron Control Device:
|
The panel boxes are placed next to the entrance on the above/below floor
|
The operating procedures :
(1) The lifting platform has been strictly debugging, arbitrarily adjust the regulator valve.
(2) Carefully check the hydraulic, electrical system, no leakage or bare phenomenon before use, do not loose all the joints and fasteners before you can use.
(3) Power on, start the motor, empty lift, check the hydraulic system before use.
(4) The center of the load should be as close as possible to the center of the work surface. The moving doors at both ends of the guard railing should be locked before working.
(5) The lifting platform shall work strictly in accordance with its prescribed carrying capacity.
(6) The lifting platform is strictly prohibited from moving and shaking during the rise and fall.
(7) Any unusual noises during the work should be stopped immediately to avoid injury to personnel or damage to equipment
(8) After the work completed, you should lower the platform, cut off the power supply, and close the legs, pushing the platform into the specified position.
